How Cut Resistant Gloves Level Are Resistant?

25 Apr, 2022

By hqt

Cut Resistant Gloves Level Are Resistant
Cut Resistant Gloves Level Are Resistant

How to choose cut resistant gloves?

First of all, I will explain how to choose cut resistant gloves level. In addition to preventing injuries caused by blades, there are products that have various functions, so choose the one that best suits your needs. The point when choosing is to look at the cut resistance plus α.

"Incision resistance level" and "piercing resistance level" are the most important. The higher the number, the higher the strength! The strongest is level 5

When choosing cut resistant gloves, the points to check are the cut resistance level and the puncture resistance level. 

The cut resistance level is an evaluation of the difficulty of cutting

The strength of cut resistant gloves level is judged according to the standard called EN388 established in Europe. The way to distinguish the level is based on how many times the rotary sword is reciprocated on the object and cut. There are levels from 0 to 5, and the higher the number, the higher the strength.

The puncture resistance level represents the level of how much force it can penetrate with a dedicated device. Levels range from 0 to 4, and gloves with a 4 are made sturdy enough to withstand a force of 150 Newtons.

Also check which part of the finger, palm, or instep is resistant to cuts

Most cut resistant gloves level has cut resistance on the palms and fingers, but the back of the hand is also safer and safer in case of emergency. If you have a high risk of cuts such as when working in a place with a lot of sharp objects, you should purchase a type that also protects the back of your hand.

Choose materials and features that suit your needs

There are products with various functions such as those with waterproof function and those specializing in piercing resistance. Make sure you understand the characteristics of each and then choose the product that suits your needs.

Wear special gloves for chainsaws and mowers

If you're looking for cut resistant gloves level for chainsaws or mowers, choose your own gloves. Gloves made of Kevlar fibers or polyethylene carry the risk of fibers getting caught in rotating parts. On the other hand, leather gloves do not have to worry about fraying, so they are less likely to get caught in an accident.

For cooking, wear gloves that can be used hygienically

When used for cooking to cut meat and fish, gloves that comply with the Food Sanitation Law are ideal. The Food Sanitation Law is a standard established by the Ministry of Health, Labor and Welfare to ensure food safety.

With normal gloves, harmful substances contained in gloves can adhere to food. When you come in contact with food, be sure to wear gloves that clear the Food Sanitation Law.

Wear cut resistant gloves level: resistant to piercing

When dealing with dangerous materials such as broken glass, it is a good idea to choose a type that is resistant to piercing. Leather gloves are made tough, so you can rest assured when cleaning up sharp or small debris. Also, if it has a non-slip feature, it will be easier to work with a blade.

When purchasing cut resistant gloves, it is important to check the incision resistance level and puncture resistance. The cut resistance level is the resistance to being cut, and is a standard called EN388 made in Europe. This depends on how many times the round blade is reciprocated over the subject and cut.

We recommend cut resistant gloves level the top 5 levels, which are very tough as they can withstand more than 20 round trips.

And another piercing resistance is to pierce the subject with a sharp needle and measure how much force it penetrates. It has up to 4 levels and can withstand forces up to 200N (Newton). By the way, 200N is equivalent to 200Kg, so it will be quite durable.

It is safer if the back side also has a cut resistance effect

Cut Resistant Gloves Level 2022

Cut resistant gloves do not have cut resistance as a whole. There is also a type with only the palm and fingers, so if the blade hits the back of the hand, you may get injured. Therefore, if you want to use cut resistant gloves level more safely, use a type that also has cut resistance on the back side of your hand.

Please note that the piercing resistance is usually only on the palm and fingers, and in most cases. It is not attached to the back of the hand.

Choose the type that suits your needs

Next, select the appropriate blade-proof gloves according to the application. Depending on the material, there are some weaknesses, so you will not be able to demonstrate its performance unless you select it for each application.

Dedicated type for chainsaws and mowers!

If you're looking for cut resistant gloves level for a chainsaw or mower. Be sure to use the type labeled for chainsaws. Here are common types of cut resistant gloves, such as Kevlar fibers and high-strength polyester fibers. They should not be used on chainsaws or mowers as they can get caught in rotation.

Cut resistant gloves for chainsaws are often made of leather to prevent them from getting caught. They are made to slide and protect the blade by putting a special pad on the back of the hand.

There are also gloves for chainsaws. They contain shock-absorbing materials and have only an anti-vibration effect, so be careful not to make a mistake.

If you use cut resistant gloves level during cooking work

For those who want to use cut resistant gloves for cooking. We recommend products that comply with the Food Sanitation Law and types that can be washed. Not only kitchen knives but also various blades such as slicers and peelers are used for cooking.

There are dangerous tasks such as peeling oyster shells, so blade-proof gloves are very useful!

If you want to get rid of broken glass safely

Cut resistant gloves level is convenient not only for cutting blades but also for handling dangerous objects such as broken glass.

However, some glass fragments are sharp, so we recommend the type that is strong not only for cutting but also for piercing. Also, it is easier to use if there is a non-slip so that you can easily grasp fine glass.