Thing about Cut Resistance Gloves

24 Apr, 2022

By hqt

best-cut-resistant-glove-2022
Cut Resistance Gloves

Can resistance gloves resist knife stabs?

You need to understand two concepts: cutting and stabbing are different. Cutting is in the length, and stabbing is in the direction perpendicular to the surface. Therefore, a level 5 cut resistance gloves does not mean it can withstand a level 5 piercing force, and vice versa.

Do resistant gloves never break or tear?

Any item has a shelf life, using cut resistant gloves for a long time can affect the texture of the material that makes up the glove. In addition, during use, we also need to clean the gloves regularly, the chemicals used to wash the gloves can affect the physical and chemical properties of the gloves. Therefore, it needs to be replaced after 6 months of use.

As mentioned in the section of cut resistance of cut resistance gloves, we will also understand that at each different level, the cut resistance will be different. For example, at level 1, you just need to use a sharp knife and press the knife hard, the glove will be broken.

And with the same knife, cutting a level 3 cut-resistant glove will only cut it after 7 to 8 strokes. That's why gloves at any level will definitely break, never.

Do not wash cut resistant gloves

Cut resistant gloves are completely washable, no matter what material they are made of (fiber, nitrile coated, steel thread). However, you should wash with warm water mixed with dilute soap, avoid using too much detergent that will affect the material that makes up the glove.

Hard, rough, and difficult-to-handle cut resistance gloves

Cut resistant gloves are woven from yarn, so they are soft and comfortable. This does not cause difficulties for the wearer during work. It makes it difficult to work. It will not be used by consumers as much as it is today.

The difficulty of manipulation when working is simply due to the choice of gloves that are not the right size for the hand. Gloves are too wide, making it difficult to hold, especially when working with small components and details such as screws.

Sharp-flex cut resistant gloves

A cut resistance gloves made of lightweight synthetic fibers, the knitting technique has perfect support, minimizes dust and provides the most solid and true feeling when used. Breathable back panel contributes to improved ventilation during use. Guaranteed cut resistance level 5 according to EN388 standards.

False “fantasy” about cut resistant gloves

Anti-cutting Gloves according to international standards have many different levels of cut resistance. The smallest is level 1 and the highest is 5.

Cut resistant means resisting impacts that tear the glove, not just cutting it with a sharp object. It includes characteristics such as stretching, abrasion, friction, poking, and stabbing. When wearing cut resistance gloves, we will be protected under external forces below its tolerance limit according to the levels given by the manufacturer.

And who said that wearing this glove can resist saw blades, or mechanical grinding machines, etc.

It is extremely dangerous and completely wrong because: the machines will pull the gloves on, along with the psychology of being already cut-resistant. So not afraid to make it comfortable anymore, it's even more dangerous. Even if you wear steel gloves, put it on the saw blade, the blade, the grinder it still crushes as usual.

Cut resistance gloves resistant to knives

Cut Resistance Gloves 2022

Cut resistant means Blade cut, not Punctual Resistant. Penetration resistance is a different style and also has its own tests.

So, level 5 cut resistant gloves does not mean level 5 puncture resistance and vice versa.

Cut resistant gloves that never tear

As mentioned above, protection features also have its limits. You take out a Level 1 glove and use a sharp knife to cut it, it will definitely break. Or Level 3 uses a sharp knife to cut 5 times before breaking. It doesn't break, it will be broken on the 5th, 6th and 5th strokes. It's definitely broken, not just broken!

Moreover, time with chemicals can reduce the life of cut resistance gloves. So, you should change gloves often or change them immediately after the gloves suffer too much injury!

Non washable cut resistant gloves

Cut resistant gloves are fully washable. They're all washable. The washing method is a little different.

Cut resistant gloves are very hard and hard to work with

Even armor like Iron-man's is easy to manipulate, let alone the protective gloves used in production work. No one can make it difficult not to hold it. Usually, cut resistance gloves will be made of synthetic fibers for easy washing and cleaning (as mentioned above) so they will be soft. Steel fiber gloves often have fewer grips. 

Find the right Cut Resistant Glove

However, many manufacturers have also tried to improve these disadvantages, so don't worry too much. The key is choosing the right glove. Do not subtract loss, because gloves that are too wide will make it difficult to hold. Especially when working with small details such as screws, iron edges, etc.

During the working process, in production activities, employees must often come into contact with toxic substances, sharp objects, agents that can affect workers' health, etc. However, the equipping of labor protection equipment including PU coated gloves, palm PU coated gloves, anti- static clothing , clean room shoes, etc. is extremely necessary.

The types of protective gloves on the market today are very diverse and rich, protective gloves can be used in many working environments such as: chemical, anti-static, food, easy to cut ... In terms of materials, protective gloves will be divided into four types as follows:

  • Gloves are made of metal mesh material, leather material
  • Gloves are made of silver coated fabric
  • Chemical resistant gloves
  • Anti-static rubber gloves

Benefits of work gloves

Metal mesh gloves, leather material

  • High durability, protecting users from cuts from knives, saw blades, scissors, sharp objects, ...
  • Some can be used in high temperature environments.
  • Often used when working with welding machines, cutting machines.

Conclude cut resistance gloves

Remember that cut-resistant gloves only work to help protect your hands from sharp objects, iron edges that cut your hands when doing jobs in the aluminum, glass, steel, glass industry, etc. Recommendation: cut resistance gloves should not be worn when working with machines of rolling nature (spinning) such as electric chainsaws, sewing machines, drilling machines, etc.

allowfullscreen="">