How Are Gloves Cut Resistant Tested and Rated? 

25 Apr, 2022

By hqt

Cut Resistant Gloves: 2022 Top Varieties and Features
Cut Resistant Gloves: 2022 Top Varieties and Features

Given the levels of gloves cut resistant possesses, you have a better chance of choosing the right one for your job. Remember that personal protective equipment is quite expensive, especially if you decide to buy a cheap and low-quality replacement or the wrong product. With that in mind, choose a truly durable glove.

Cotton can be selected for a higher level of cut resistance

It should withstand the hardships for a long time so that you do not have to spend time and money on frequent replacements. Identify the specific materials you need. Protective glove manufacturers use different materials and provide different levels of cut resistance.

You can find leather gloves, but don't expect them to be as gloves cut resistant as others unless they come with a cut resistant lining. If you want the highest levels of abrasion and cut resistance, consider choosing gloves made of DYNEEMA or Kevlar.

A more perfect glove is made of the two materials mentioned, but additionally improved with the use of steel fibers. Identify a specific material or blend of materials suitable for your chosen industry.

Maintenance of cut protection gloves

Cut resistant gloves may differ from standard gloves in the way they care for them. Some of these gloves are machine washable without worrying about damaging them. There are those that require hand washing.

Almost gloves cut resistant requires air. Avoid putting it in the dryer as this may cause it to shrink. The dryer may damage the glove so that it cannot use anymore. When washing, avoid the use of bleach, harsh chemicals or fabric softeners.

It is important to take time to check before each use. It should inspect for potential holes, weak parts, and tears. When it comes to cleaning and washing, you can use some soap and water.

Cut-resistant gloves: FAQ

What are the most popular brands of cut resistant gloves?

Several well-known and trustworthy brands of cut resistant gloves are on the market today. When it comes to quality, durability, level of protection and comfort. The standout glove brand here is NMSAFETY.

What are gloves cut resistant made of?

Cut protection gloves are made of a wide variety of materials and it is up to the prospective buyer which of the different materials he considers most appropriate for the type and level of protection.

In most cases, gloves construct from one or more of the most common materials, including synthetic nylon fabric, synthetic polyester fabric, Kevlar, metal weave or metal mesh, as well as a wide variety of natural materials such as leather, wool, cotton and gum.

When are gloves cut resistant required?

Cut protection gloves require in workplaces and industries where workers expose to objects and machinery that make them more susceptible to cuts, wounds or plasters.

Some of these include workers in the food and construction industries. If you are an employer, it is even more important to invest in cut-resistant gloves for your employees.

How are cut protection gloves tested and rated?

Cut resistant gloves must test to receive an official cut resistance rating. The test should carry out before the glove place on the market. The gloves cut resistant must test to determine its evaluation under artificial conditions.

Approved test techniques can determine the level of force needed to cut the glove material. In this case, either a standard blade or a rotating blade will use. Note that the tests do not reflect the actual conditions, applications and industrial situations.

How to choose the right size?

Gloves Cut Resistant 2022

No matter how good the quality of a particular cut resistant glove is, if it is not the correct size it will not give you sufficient protection. A glove that is too small can be uncomfortable and painful to wear, and a glove that is too large can cause it to slip.

To find the correct size of gloves cut resistant, check that the brand or company you choose has a size chart. This favors the ease and speed of finding the one that fits your size. It is necessary to take the actual measurement of the hand and use the result to correctly match the measured size to the size chart.

This should be done with tape, wrapping it around the widest part of your hand. If possible, ask someone for help so that you can do it easily. The result measures in centimeters, it indicates the actual size of the glove.

Choose the right cut-resistant gloves for hand protection 

Hands are the most used tool by man for their precision, agility, strength, endurance and obviously grip. 

Gloves cut resistant are a delicate and fragile instrument that must adequately protect to avoid incurring one of the 1,400,000 hand injuries that occur on average every year due to incorrect protection. One third of these injuries occur in the workplace, causing an economic loss of around € 15,000 each.

There are many types of gloves on the market, but it is appropriate to refer to the new European standard EN 388: 2016 to choose the correct protective gloves against mechanical risks.

The EN 388: 2016 standard expresses the level of gloves cut resistant through a pictogram accompanied by the letters from A to F which indicate up to 6 different mechanical performance measures.

  • A - Resistance to abrasion
  • B - Resistance to blade cutting
  • C - Tear resistance
  • D - Resistance to perforation
  • E - EN ISO cut resistance
  • F - Impact protection EN

Cut resistant gloves: what you need to know before choosing them

To choose the correct cut protection gloves based on the type of activity you carry out, it is important that you first know that the cut resistance measures in Newton (N) using the TDM-100 Test according to ISO 13997. The N value indicates the force require to cut the glove material. The higher the value, the greater the cut protection.

It is also important to know that gloves cut resistant can be made of nitrile or polyurethane (PU). From a chemical point of view, the nitrile polymers are very resistant, have characteristics similar to those of the range and excellent protective properties in case of contact with oil, grease and petrol.

The elastic polyurethane has a relatively high tensile strength and the coating with this material gives the cut resistant gloves high sensitivity, considerable resistance to abrasion and oil.

allowfullscreen="">